Sonnum, LLC., a home builder based in Nashville, TN was building high end custom homes with all available upgrades and a special emphasis on en-ergy efficiency. They were looking for a versatile insulating system to be used in a variety of...
Learn MoreDesigned and built by Go Green Construction as a LEED Platinum home near the Pacific shoreline of California, this home incorporates the most advanced technologies in the construction industry today. Flash & FOIL® was used in this home as an...
Learn MoreKnown for his luxury homes in the suburbs of Chicago, this is Robert Lord Builder’s first Custom Home in Florida. It is a 3-story home built using the frame wall structure. Robert Lord Builders is an ENERGY STAR (EPA) Partner and is committed to...
Learn MoreWhen we got a call from Zylstra Harley Davidson in Dallas Center, Iowa, requesting more information about HY-Fi, our revolutionary hybrid insulation system, we knew this would be the perfect application for HY-Fi. The issue Zylstra Harley Davidison...
Learn MoreBrant & Son, Inc. presented Silver Shield as an option to Epoch Properties, for saving energy and keeping their Clubhouse more comfortable year-round. The Clubhouse is located in Jacksonville, FL at their new Community - Coventry Place Apartments...
Learn MoreSonnum, LLC., a home builder based in Nashville, TN was building high end custom homes with all available upgrades and a special emphasis on en-ergy efficiency. They were looking for a versatile insulating system to be used in a variety of...
Learn MoreSince offering their first Florida Green Building Coalition (FGBC) Green Home Standard certified home in 2008, Holiday Builders has been integrating more and more green features into their product line. They are now proud to offer these green...
Learn MoreRequirement for the HVAC equipment to be in a conditioned air-sealed environment; meet the building code requirement for Energy Efficiency and Safety for Spray Foam Insulation; and to cover the exposed Fiberglass. New Attic Hybrid System for...
Learn MoreNeeded to improve energy efficiency of existing homes to help low-income residents lower cost of their utility bills. In May 2011, Housing Authority of the City of Charleston was honored with the US Green Building Council’s Leadership Award for...
Learn MoreNeeded an insulation facing for their knee wall, that could hold the batt insulation in place until the drywall was installed. Fi-Foil’s Radiant Shield™ is offered in a Standard (non-perforated or vapor retarder) or Hi-Perm (perforated)...
Learn MoreSonnum, LLC., a home builder based in Nashville, TN was building high end custom homes with all available upgrades and a special emphasis on en-ergy efficiency. They were looking for a versatile insulating system to be used in a variety of...
Learn MoreDesigned and built by Go Green Construction as a LEED Platinum home near the Pacific shoreline of California, this home incorporates the most advanced technologies in the construction industry today. Flash & FOIL® was used in this home as an...
Learn MoreKnown for his luxury homes in the suburbs of Chicago, this is Robert Lord Builder’s first Custom Home in Florida. It is a 3-story home built using the frame wall structure. Robert Lord Builders is an ENERGY STAR (EPA) Partner and is committed to...
Learn MoreWhen we got a call from Zylstra Harley Davidson in Dallas Center, Iowa, requesting more information about HY-Fi, our revolutionary hybrid insulation system, we knew this would be the perfect application for HY-Fi. The issue Zylstra Harley Davidison...
Learn MoreThe R-21 wall insulation system specied was a hybrid application consisting of 2” of closed cell spray foam and HY-Fi, a multi-layer reective insulation. Combining the technologies provided a more cost eective air sealing and thermal insulation...
Learn MoreThe R-21 wall insulation system specified was a hybrid application consisting of 2” of closed cell spray foam and HY-Fi, a multi-layer reflective insulation. Combining the technologies provided a more cost effective air sealing and thermal...
Learn More- 3" of open cell and HY-Fi in 2x6 (R-20 in 2x6), supporting documentation available - 2x4 2.5 inches of open cell and HY-Fi (R-14) - R-14.8 increased to R-20, eliminating inch of open cell foam by adding HY-Fi - No shaving required - no waste! "We...
Learn MoreAt Fi-Foil we're thrilled when we can share stories regarding returning customers. This is the second home Pat Kazcor has utilized the HY-Fi hybrid wall insulation system. In fact, this particular project we've used HY-Fi on his daughter's home....
Learn MoreThere are currently no profiles available for this product, please check back later.
There are currently no profiles available for this product, please check back later.
Suffolk Construction was brought in to finish the project due to several issues with the original general contractor, and their first challenge was to collaborate with the owner’s representative and project’s design team to bring the project...
Learn MoreMixed-use development includes 2 buildings, 8-story and 280 condo units (780 to 1,539 Sq Ft). The Slade is ideally situated in the Channelside District, the location adjacent to Tampa’s port and downtown business district, and is the epitome of...
Learn MoreGables Construction had an R-5.0 masonry wall insulation specification requirement and needed to reduce the cost of the project. C Q Insulation has used Fi-Foil’s AA2 Vapor Shield on several other commercial projects, and knew it was the right...
Learn MoreThe Porsche Design Tower project broke ground in April of 2013 on 2.2 acres of beautiful beachfront land at Collins Ave. in Sunny Isles Beach. The Fi-Foil team began working with Sieger Suarez Architects in January of 2014 to discuss the advantages...
Learn MoreGFP Insulation was selected to upgrade the 5th floor of the NYPA LEED Gold Rated Building in White Plains New York. 13 Floors will be renovated with the objec-tive of upgrading the sustainability or Green features in the building. Argon gas was used...
Learn MoreThe 20-year fairgrounds’ arena was showing it’s age, with vinyl faced insulation seams separating and sections falling down and needed a face-lift. West Coast Insulation of Sebring, FL had installed Fi-Foil’s RetroShield® System on a...
Learn MoreInsight Auctioneers built a new office/warehouse and they wanted a metal building insulation that would not absorb moisture, while keeping their building cooler in the hot Florida summer. Having installed Fi-Foil’s RetroShield® System in their...
Learn MoreWanted to create a cleaner, more sanitary warehouse environment. Tidewater Insulation installed Fi-Foil’s RetroShield® System which has also been used successfully in the renovation of other warehouses. RetroShield® System combines RBI...
Learn MoreThe existing ceiling and wall insulation in their gym was separating at seams, breaking down and in need of repair. Cary Quality Insulation & Building Products recommended Fi-Foil’s RetroShield® System which has also been used successfully in...
Learn MoreThe original metal building insulation was cracked, split open and yellow with age. Service Partners recommended Fi-Foil’s Retroshield System to improve the appearance & insulation performance of the building. Service Partners contacted another...
Learn MoreThe Exchange Park Building at the fairgrounds in Ladson, S.C. has a long history of hosting corporate events, festivals and shows, the fees from which go toward non-profits and charities. In 2016, the Coastal Carolina Fair alone raised more than...
Learn MoreThere are currently no profiles available for this product, please check back later.
This was the 99th restaurant in the chain and the first operated under the Sweet Tomatoes brand to feature a new prototype design. The new design offers a “contemporary farmer’s market” look, with a mixture of authentic and new, earthy and...
Learn MorePolk County School Board has included Fi-Foil’s FSK Shield™ as part of their building standard for several years now, and it continues to provide them with a lower cost option to FSK-faced Batt Insulation. Providing a durable support system for...
Learn MoreUnframed barrier walls that needed a Class A fire-rated material, which spray foam could adhere to, and that could span large areas without stretching. Fi-Foil’s FSK Shield™ has two facings - a low-emittance foil layer and a Kraft paper layer....
Learn MoreCommercial building code requires Class A rated facing on insulation installed above uspended ceilings. To lower costs, BMK Architects specified Fi-Foil’s FSK Shield™, as Class A rated facing, with unfaced batt insulation. This hybrid system...
Learn MoreCommercial building code requires Class A rated facing on insulation installed above suspended ceilings. FSK-faced batt insulation was too expensive, so the architect specified Fi-Foil’s FSK Shield™ as Class A rated facing, with unfaced batt...
Learn MoreThe FSK Shield™ Class A, fire-rated, aluminum facing changes the air film conefficient to low-e (emittance). In this situation, it's an insulated roof deck (see images 1 and 4). This application adds an R-4.6 to the insulation system according to...
Learn MorePolk County Public Schools, Bartow, Florida needed a way to meet Florida Building Codes and install the batt insulation above their drop-in acoustical ceiling tiles, so it would be easier to repair and replace ceiling tiles, work on lighting and...
Learn MoreThere are currently no profiles available for this product, please check back later.
There are currently no profiles available for this product, please check back later.
There are currently no profiles available for this product, please check back later.
There are currently no profiles available for this product, please check back later.
There are currently no profiles available for this product, please check back later.
There are currently no profiles available for this product, please check back later.